2024 Exmark Staris E-Series STE600CKA363H1

MoreLess
Limited Time Offer!

Selling Price -$10,799.00

2023 Exmark Staris E-Series STE600CKA363H1

Available with a choice of 32-, 36- or 44-inch UltraCut Series 3 cutting decks, Staris E-Series commercial stand-on mower strike the perfect balance of productivity and value. The compact size of the 32-inch model allows it to fit through 36-inch gates and into tight spaces - a must for commercial mowing. A top ground speed of 10 mph enables landscape pros to mow more properties, more quickly, without the fatigue typically experienced with a small walk-behind mower. A large, open operator platform allows for easy step-on step-off. Constructed from heavy-duty tubular steel, Staris frames feature the same wall thickness as our industry-standard Lazer Z zero-turn riders. Proven Kawasaki V-twin commercial engines feature cast-iron cylinder liners, pressurized lubrication and a rotating grass chopper screen to minimize debris in the cooling system.

Features may include:

Cut Quality
  • The Staris E-Series features proven UltraCut Series 3 decks delivering Exmark's signature quality of cut.
Drive System
  • The trusted pump and wheel motor combination provides commercial durability and smooth control. The system utilizes hard hydraulic lines reducing potential leak points, improving durability and hydro-oil cooling.
Serviceability
  • The flip up front cover gives operators easy access to perform routine lawn mower maintenance and cleaning, without the need for tools. The rear cover lifts and locks into place providing easy access to check and fill both engine oil and hydro fluid.
Commercial-Grade Engine
  • Kawasaki commercial-grade engines are featured on the Staris E-Series.
Compact Design
  • The compact size reduces trailer space and storage and gives the ability to access more yards, more quickly, while providing exceptional maneuverability on tough terrain.
  • 2024
  • Exmark
  • Staris E-Series
  • STE600CKA363H1
  • Stand-On
  • Model: FS600V | Series: V-Twin | Spec: _S36
  • Standard Engine Manufacturer's air filter
  • 603
  • Kawasaki
  • 3,600 rpm
  • Carbureted | Indicator Yes - Float Gauge
  • Gas Carbureted
  • Engagement: Warner 105 ft-lb clutch
  • Hydro-Drive | Description: Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors. | Drive Wheel Release: Allows unit movement without engine running.
  • Twin levers with adjustable front reference bar to modify forward ground speed.
  • Lever-actuated bar brake.
  • 9 x 4.50-5, smooth-tread, semipneumatic tires with sealed ball bearings. | 21x7.00-10 Kenda K505
  • 12-volt battery with 15-amp alternator.
  • Infinitely variable speed selection 0–7.5 mph (12.1 kmph) forward, 0–4.0 mph (6.4 kmph) reverse
  • Blade: Approximately 18,500 fpm.
  • Tractor: Welded, heavy-duty 1.5" x 3" tubular steel.
  • 36"
  • Cutting: 1.0" (2.54 cm) to 4.5" (11.4 cm) in 0.25" (0.64 cm) increments | 47.3"
  • 2 Blades at: 18.00" | 58.103"
  • 48.0"
  • 5-gallon (18.9-L), single fuel tank with single fill location.
  • Curb: 779 lbs
  • Caster Forks: .38 thick caster yoke arms with sealed ball bearings | Engine Hour Meter | UPC: 193308207636 | Operator Presence Controls (OPC) with safety interlock system indicators | Deck Lift: Single point HOC | Deck Style: Floating Deck | Deck Style Description: Full-floating UltraCut Series 3. Side discharge standard, with flexible discharge chute and option to bag or mulch.
  • No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
  • 7-gauge top that is formed and continuously seam welded, 7-gauge side skirt
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $10,799.00
  • Panama City
  • New
  • In Stock
  • 2024
  • Exmark
  • Staris E-Series STE600CKA363H1
  • Model: FS600V | Series: V-Twin | Spec: _S36
  • Gas Carbureted
  • Available
  • 48.0"
  • Cutting: 1.0" (2.54 cm) to 4.5" (11.4 cm) in 0.25" (0.64 cm) increments | 47.3"
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.