2023 SANY® Wheel Loaders SW305K 32,222 LB
The SANY SW305K wheel loader is the constant workhorse in your fleet. Beyond outstanding durability and reliability, this machine focuses on increased operator comfort for long production days. Your operators will enjoy unobstructed views to the bucket, a 360-degree camera, better ergonomics to lessen fatigue and features like USB port and keyless entry. The SW305K’s Z-bar linkage design delivers a robust 27,143 lbs of breakout force. You can rely on this wheel loader’s time-tested components like the Deutz engine, ZF transmission and Kawasaki pumps–offering you an impressive service life over the long haul.
Features may include:
- Engine: Deutz TCD 7.8
- Boom suspension system
- Differential locking axle
- Automatic transmission kick down
- Bucket self-leveling and return to dig
- SANYLive telematics
- Single joystick control
- Third function hydraulics
- 360-degree camera
- 2024
- SANY®
- Wheel Loaders
- SW305K
- Compact
- TCD6.1
- Deutz
- Gross: 181 HP | Net: 163 HP
- Gross: 649 lbs ft
- 372 in3
- Shift modes: Automatic, Manual, Kick-Down | Forward Gear 1-4: 4–25 mph | Reverse Gear 1-4: 4–17 mph
- Service Brakes: Wet disc | Parking Brake: Disk Brake
- Breakout Force: 27,652 lbf | Tipping Load Straight: 19,619 lbs | Tipping Load @ Full Term: 17,006 lbs | Reach at Max. Lift and 45º Discharge: 1038 mm (3' 5")
- Raise: 5.6 sec | Dump: 1.6 sec | Float Down: 3.2 sec | Total Cycle Time: 10.4 sec
- Max: 58 GPM
- Max: 3,916 PSI
- Center Line of Rear Axle to Edge of Counterweight: 1,911 mm (6' 3") | Center Line of Front Axle to Center Pivot: 1,480 mm (4' 10") | Dump Clearance at Max. Lift : 2,689 mm (8' 10") | Reach at Max. Lift and 45º Discharge: 1038 mm (3' 5") | Roll Back at Max. Lift: 61º | Dump Angle at Max. Lift and Dump: 45º | Roll Back at Ground: 42º | Tail Angle to the Rear Wheel: 28º | Clearance Circle to Outside of Tires: 5,382 mm (17' 8") | Clearance Circle to Counterweight: 5,365 mm (17' 7") | Max. Circle: 5,969 mm (19' 7") | Articulation Angle: +/- 40º
- Full lift 45º dump: 8' 10" | 407 mm (1' 4")
- To Top of Cab: 3,405 mm (11' 2") | Max Dump: 5,226 mm (17' 2") | Hinge Pin at Max. Lift: 3,845 mm (12' 7") | Roll Back at Carry: 49º
- 3,000 mm (9' 10")
- Shipping without Attachments: 6,226 mm (20' 5") | Shipping with Bucket: 7,518 mm (24' 8")
- Dig Level Bucket: 122 mm (4.8")
- 2,045mm (6' 9")
- Tank: 60 gal
- 8.7 gal
- Crankcase: 4.1 gal | DEF tank: 2.6 gal
- 9.2 gal
- 9.2 gal
- Tank: 34 gal
- Front Axle: Fixed | Traction Aid: Manual Differential Lock | Rear Axle: Oscillating | Traction Aid: Open Differential
- Operating: 31,967 lbs
- Starke
- New
- In Stock
- 2024
- SANY®
- Wheel Loaders SW305K
- TCD6.1
- Shift modes: Automatic, Manual, Kick-Down | Forward Gear 1-4: 4–25 mph | Reverse Gear 1-4: 4–17 mph
- Diesel
- Available
- 2,045mm (6' 9")
- To Top of Cab: 3,405 mm (11' 2") | Max Dump: 5,226 mm (17' 2") | Hinge Pin at Max. Lift: 3,845 mm (12' 7") | Roll Back at Carry: 49º