2023 SANY® Backhoe Loader SLB95 17,637 LBS
Agile and simple to operate, SANY’s backhoe loader is a tool carrier optimized for a variety of applications. It puts the power in your hands with the advantage of multi-purpose performance and greater versatility plus the ability to move from site to site without a trailer. The SLB95 is an all-around reliable workhorse.
Features may include:
- 4WD Powershift Transmission with Limited Slip Differential and Drive Shaft Guard
- Flip-Over Pads, Outrigger Cylinder Guards and Front Bumpers
- Load Sensing Hydraulic with Pilot Controls and ISO/SAE Pattern Change
- Eight LED Working Lights, Rotating Beacon, Traffic Lights, Air Suspension Seats, and 3? Retractable Seatbelt
- Boom Float, Return to Dig, and Breaker Line
- ROPS/FOPS Certified (ISO-3471, ISO-27850, ISO-3449)
- 2024
- SANY®
- Backhoe Loader
- SLB95
- General
- Deutz TCD3.6-L4 - Low Maintenance T4F
- 3.6 L (220 in³)
- Gross: 73.8 kW @ 2,200 rpm (99 hp @ 2,200 rpm) | Net: 70.8 kW @ 2,200 rpm (95 hp @ 2,200 rpm) | Hydraulic: 39 kW @ 2,200 rpm (52.3 hp @ 2,200 rpm)
- 410 Nm @ 1,600 rpm (302.4 lbs-ft @ 1,600 rpm)
- ZF 4WD — 4 Speed Forward/Reverse
- Speed Gear 1: 4.8 km/hr (3 mph) | Speed Gear 2: 9.6 km/hr (6 mph) | Speed Gear 3: 19.3 km/hr (12 mph) | Speed Gear 4: 35.4 km/hr (22 mph)
- Kawasaki Variable Displacement—Axial Piston
- Load Sensing with Pilot Controls
- System: 156 l/min (41.2 gal/min) | One-way Aux Line Max Flow: 79.4 l/min (21 gal/min)
- 24.9 MPa (3,625 psi) | One-way Aux Line Max Pressure: 14.5 MPa 2,103 psi
- Bucket Breakout Force—Excavator: 55 kN (12,354 lbf) | Bucket Breakout Force—Loader: 50 kN (11,240 lbf)
- Maximum Reach from Center of Swing Pivot: 5,671 mm (18' 7") | Dump Clearance: 2,700 mm (8' 10") | Reach at Dump Position: 730 mm (2' 5") | Bucket Rollback Angle @ Ground Level: 40º | Bucket Rollback Angle @ Full Height: 51º | Loader Dump Angle @ Full Height: 44º
- 7,381 mm (24' 3")
- 2,280 mm (7' 6")
- 3,732 mm (12' 3")
- Cab: 3,129 mm (10' 3") | Maximum Digging: 5,370 mm (17' 7") | Maximum Height to Bucket Hinge Pin: 3,478 mm (11' 5") | Maximum Operating: 4,293 mm (14' 1")
- Minimum: 320 mm (1' 1")
- From Axle to Axle: 2,245 mm (7' 4")
- Rear: 1,780 mm (5' 10")
- Front Tires: 4,240 mm (13' 11") | Front Bucket: 4,800 mm (15' 9")
- Stabilizer: 3,491 mm (11' 5")
- 4,332 mm (14' 3") | Maximum Digging Depth with Bucket Leveled: 88 mm (3")
- 140.0 L (37.0 gal) | DEF Tank: 10.0 L (2.6 gal)
- Hydraulic: 120.0 L (31.7 gal) | Engine: 8.5 L (2.2 gal) | Gearbox: 18.0 L (4.8 gal)
- 20.0 L (5.3 gal)
- Operating (Cab + Attachments): 8,040 kg (17,725 lbs) | Operating (Canopy + Attachments): 7,880 kg (17,372 lbs) | Operating (Cab, no attachments): 7,540 kg (16,623 lbs) | Operating (Canopy, no attachments): 7,360 kg (16,226 lbs)
- Live Oak
- New
- In Stock
- 2024
- SANY®
- Backhoe Loader SLB95
- 95
- ZF 4WD — 4 Speed Forward/Reverse
- Diesel
- Available
- Cab: 3,129 mm (10' 3") | Maximum Digging: 5,370 mm (17' 7") | Maximum Height to Bucket Hinge Pin: 3,478 mm (11' 5") | Maximum Operating: 4,293 mm (14' 1")